Engine Block Heater: Removal: Installation
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Thoroughly clean cylinder block heater cavity.
- Insert heater assembly into block such that mounting hole is located below heater terminals.
- Install mounting screw and tighten to 12 N.m (105 in. lbs.).
- Attach power cord to heater.CAUTION: To prevent damage, the power cord must be secured in its retainer clips, and not positioned so it could contact linkages or exhaust manifolds.
- Lower vehicle.