Trunk Release
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Trunk latch motor and release solenoid are part of trunk latch assembly.
Ensure at least 10 volts is present at trunk release solenoid when switch is pressed. See WIRING DIAGRAMS . Ensure there is a good ground through latch mounting bolts. Remove latch and check plunger. Plunger should spring back when pressed. Ensure solenoid plunger travel is at least 5/8" (16 mm). Replace trunk latch assembly if release solenoid does not operate as specified. See TRUNK LATCH ASSEMBLY under REMOVAL & INSTALLATION.