Wiper/Washer Switch
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, 2003 Chrysler 300M, and 2002 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.
Wiper/washer switch is part of multifunction switch. Disconnect multifunction switch connector. See WIPER SWITCH under REMOVAL & INSTALLATION. Measure resistance between switch terminals with switch in appropriate position. See WIPER/WASHER SWITCH RESISTANCE table. See Figure . If resistance is not as specified, replace wiper/washer switch.
WIPER/WASHER SWITCH RESISTANCE
| Switch Position | Between Terminals No. | K/Ohms | |||
|---|---|---|---|---|---|
| OFF | 1 & 3 | 300 Or More | |||
| Delay Level | |||||
| 1 (Maximum) | 1 & 3 | 9.72 | |||
| 2 | 1 & 3 | 8.22 | |||
| 3 | 1 & 3 | 6.61 | |||
| 4 | 1 & 3 | 5.12 | |||
| 5 | 1 & 3 | 3.67 | |||
| 6 (Minimum) | 1 & 3 | 2.22 | |||
| LOW | 1 & 3 | 1.02 | |||
| HIGH | 1 & 3 | 0.51 | |||
| WASH | 1 & 2 | (1) | |||
|
|||||