Service Specifications

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

MANUAL A/C SERVICE SPECIFICATIONS

Application

Specification

Compressor Type

Nippondenso 10PA17

Compressor Belt Tension

2.7L

⁽¹⁾

3.5L ⁽²⁾

New Belt

150-170 lbs. (68.04-77.11 kg)

Used Belt

120 lbs. (54.43)

Oil Capacity

System

⁽³⁾ 5.0 ozs. (.15L)

Condenser

1.0 ozs. (.03L)

Evaporator

2.0 ozs. (.06L)

Receiver/Drier

1.0 oz. (.03L)

Line Blown

1.5 oz. (.04L)

Refrigerant (R-134a) Capacity

⁽⁴⁾

System Operating Pressures ⁽⁵⁾

High Side

210-250 psi (14.8-17.6 kg/cm² )

Low Side

20-30 psi (1.4-2.1 kg/cm² )

⁽¹⁾	See BELT ADJUSTMENT in appropriate ENGINE COOLING article in COOLING SYSTEM (MECHANICAL) under ENGINES.

⁽²⁾	Measured with Belt Tension Gauge (7198).

⁽³⁾	Use ND-8 PAG refrigerant oil.

⁽⁴⁾	Refer to the vehicle's underhood HVAC specification label for correct charge specifications.

⁽⁵⁾	With ambient temperature at 80°F (27°C).