Engine Block Heater: Installation
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Thoroughly clean cylinder block heater cavity.
- Insert heater assembly into block such that mounting hole is located below heater terminals.
- Install mounting screw and tighten to 12 N.m (105 in. lbs.).
- Attach power cord to heater.CAUTION: To prevent damage, the power cord must be secured in its retainer clips, and not positioned so it could contact linkages or exhaust manifolds.
- Lower vehicle.