Remote Keyless Entry Module: Removal
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
The Remote Keyless Entry (RKE) Module is located between the junction block and body control module. Refer to ELECTRONIC CONTROL MODULES .
- Disconnect and isolate the batter negative cable.
- With the junction block/BCM removed, separate the two by removing the four retaining screws.
- Unsnap the RKE module from the BCM.