Memory Seat Glide

WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

The intent of this feature is to allow for easier entry and exit to the vehicle by moving the seat rearward a short distance when the operator turns the ignition off. The seat returns to its original position when the operator returns and turns on the ignition or extends the seat belt. If any seat movement is initiated, whether manual or by memory recall, after the ignition has been turned off, that will cancel any ensuing glide to enter movement until the next ignition cycle.

This feature can be enabled/disabled by the owner by holding the memory set button and simultaneously pressing the horizontal rearward switch. To reinstate the feature, repeat the process. This can also be done using the DRB which will also inform as to which state it is in.