Rear Window Defogger Relay: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Plug the relay into the wire harness connector.
- Install the relay fastener screw.
- Place the carpet back into position and install the fasteners.
- Connect the negative battery cable to the remote ground post.
- Test the rear window defogger system for proper operation.