Fog Lamp Unit: Installation

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

Connect fog lamp wire connector to front lighting wire harness.
Insert fog lamp rearward into opening in front bumper fascia.
Install screw(s) attaching fog lamp to fascia.

Fig 1: Fog Lamp - Intrepid
Courtesy of DAIMLERCHRYSLER CORP.

Fig 2: Fog Lamp - Concorde
Courtesy of DAIMLERCHRYSLER CORP.

Fig 3: Fog Lamp - 300M
Courtesy of DAIMLERCHRYSLER CORP.
Connect the battery negative cable and close hood.
Verify fog lamp operation and alignment. Refer to STANDARD PROCEDURE - FOG LAMP UNIT ALIGNMENT .