Headlamp Unit: Installation: Intrepid
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Headlamp lens fogging is a normal condition and does not require service unless excessive or continual. Moisture will vent from tubes or vents located on the back of the lamp.
- Place headlamp unit in position on vehicle.
- Connect wire connectors to headlamp, parking, side marker, and turn signal lamps.
- Place headlamp unit in position on body.
- Install screws to attach headlamp unit to body.
- Connect the battery negative remote cable and close hood.
- Verify headlamp operation and alignment.