LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> 42LE Automatic Transmission (Service Information) >> Removal & Installation >> Input Speed Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

NOTE: Input speed sensor is not interchangeable with output speed sensor.
  1. Disconnect harness connector from input speed sensor located on left side of transaxle. See Fig 1 . Ensure weather seal remains on harness connector. Unscrew input speed sensor from transaxle case.
  2. To install, reverse removal procedure using NEW "O" ring on input speed sensor. Tighten input speed sensor to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Identifying Input & Output Speed Sensor Locations
G00074208Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals