Torque Specifications
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, and 2002 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| A/C Belt Tensioner Pivot Bolt | ||
| 2.7L Engine | 21 (28) | |
| 3.5L Engine | 40 (54) | |
| Accessory Drive Belt Tensioner Pulley Lock Nut | 40 (54) | |
| Compressor Mounting Bolts | 21 (28) | |
| Compressor Shaft Bolt | 11-15 (15-20) | |
| Discharge Line-To-Condenser | 17 (23) | |
| Expansion Valve Lines | 17 (23) | |
| Expansion Valve-To-Evaporator | 17 (23) | |
| Receiver-Drier Fittings | 10 (14) | |
| Suction Line-To-Compressor Bolt | 17 (23) | |
| INCH Lbs. (N.m) | ||
| A/C Pressure Transducer | 53 (6.0) | |
| Blower Motor Screws | 19 (2.2) | |
| Condenser-To-Radiator Bolt | 45 (5.1) | |
| Door Actuator Screw | 19 (2.2) | |
| HVAC Housing Screws | 19 (2.2) | |
| HVAC Housing-To-Dash Panel Nuts | ||
| Engine Compartment Side | 44 (5.0) | |
| Passenger Compartment Side | 40 (4.5) | |