Control Circuit Testing

The starter control circuit has:
- Starter solenoid
- Starter relay
- Park/Neutral Starting and Back-Up Lamp Switch with automatic transmissions
- Clutch Interlock/Upstop Switch with manual transmissions
- Ignition switch
- Battery
- All related wiring and connections
- Double Start Override algorithm located in the PCM

CAUTION: Before performing any starter tests, the ignition and fuel Systems must be disabled.

- To disable ignition and fuel systems, disconnect the Automatic Shutdown Relay (ASD). The ASD relay is located in the in the Power Distribution Center (PDC). Refer to the PDC cover for the proper relay location.