Section 65 (Charging System - Generators & Regulators): Programming: Skim
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch on (transmission in Park/Neutral).
- Use the DRBIII® and select THEFT ALARM, SKIM then MISCELLANEOUS.
- Select PCM REPLACED (GAS ENGINE).
- Program the vehicle 4-digit PIN into SKIM.
- Select COUNTRY CODE and enter the correct country.
- Select YES to update VIN (the SKIM will learn the VIN from the PCM).
- Press ENTER to transfer the secret key (the PCM will send the secret key to the SKIM).
- Program ignition keys to SKIM.
NOTE:
Be sure to enter the correct country code. If the incorrect country code is programmed into SKIM, the SKIM must be replaced.
NOTE:
If the PCM and the SKIM are replaced at the same time, all vehicle keys will need to be replaced and programmed to the new SKIM.