Satellite Receiver Module: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Install the satellite receiver module to the vehicle.
- Connect the wire harness connectors.
- Push the module upward, and then outboard to install into upper retaining clips.
- Install mounting fasteners.
- Install instrument panel silencer (Refer to INSTRUMENT PANEL TOP COVER ).
- Connect the battery negative cable.