Battery Cables: Removal
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to the Off position. Be certain that all electrical accessories are turned off.
- Disconnect and isolate the remote battery negative cable terminal.
- Remove the battery from the vehicle. Refer to BATTERY .
- One at a time, trace the battery cable retaining pushpins, fasteners and routing clips until the cables are free from the vehicle.
- Remove the battery cables from the engine compartment.