September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Engine Coolant Temperature Sensor: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Install engine coolant temperature sensor (Figure) or (Figure). Tighten sensor to 28 N.m (20 ft. lbs.) torque.
- Attach electrical connector to sensor.
- Connect negative cable to remote jumper terminal.