LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Controls - Removal, Overhaul & Installation) >> Fuel Systems >> Fuel Tank >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Tank: Installation

WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the fuel tank on the transmission stand. Install fuel pump electrical connector into hole in the body.
  2. Connect wiring harness to fuel tank pin, if removed. See Figure. Connect wiring harness to heat shield, if removed. See Figure.
  3. Connect the purge and vent lines. See Figure. Raise tank into position and install tank straps.
  4. Install the fuel filler tube and tighten the clamp. Reposition the stabilizer bar and install bolts. Lower vehicle.
  5. Connect the fuel pump electrical connector that is under the rear seat. See Figure. Install the rear seat. Connect the battery cable.
  6. Fill fuel tank. Use the DRB scan tool to pressurize the fuel system. Check for leaks.
scientia non olet · About LEMON Manuals