Daytime Running Lamp Module: Operation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
The DRL allows the high beam headlamps to illuminate at reduced power when the ignition switch is in the RUN position with the high and low beam headlamp switches in the OFF position. The Park Brake must be released and the Brake Fluid Level switch must be in the OPEN position to allow the headlamps to operate in DRL mode. The daytime running lamps will go out when the headlamp switch is turned ON. The passing light feature will flash bright high beams while the daytime running lamps are activated.