LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Intrepid R/T >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Overhaul - Automatic Transmission >> Speed Sensor - Input >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Speed Sensor - Input: Installation

  1. Verify o-ring is installed into position. See Figure.
  2. Install and tighten input speed sensor to 27 N.m (20 ft. lbs.) torque.
  3. Connect speed sensor connector. See Figure.
  4. Connect battery negative cable.
scientia non olet · About LEMON Manuals