Diagnosis And Testing - Traction Control Switch

1. Remove lower column shroud.
2. Disconnect traction control switch harness from column harness below column.
3. Using an ohmmeter, check for continuity reading between pins. Refer to TRACTION CONTROL SWITCH CONTINUITY  and (Fig 1 ).

Fig 1: Identifying Traction Control Switch Connector Terminals

Courtesy of DAIMLERCHRYSLER CORP.

TRACTION CONTROL SWITCH CONTINUITY

SWITCH POSITION	CONTINUITY BETWEEN
ACTUATED	PINS 1 AND 2
ILLUMINATION	PINS 1 AND 3