Power Interrupt Connector/Switch: Service and Repair

REMOVAL
1. Turn the ignition switch to the OFF position.
2. Unlatch and open the cover of the intelligent power module.
3. Remove the IOD fuse from fuse location marked IOD of the Integrated Power Module (IPM).
4. Store the removed IOD fuse by installing it in the unused fuse storage marked SPARE of the IPM.
5. Close and latch the IPM.

INSTALLATION
1. Be certain the ignition switch is in the OFF position.
2. Unlatch and open the cover of the Integrated Power Module (IPM).
3. Remove the stored IOD fuse from fuse storage marked SPARE of the IPM.
4. Use a thumb to press the IOD fuse firmly down into IPM fuse cavity marked IOD.
5. Close and latch the IPM cover.