LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 M >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - Automatic Transmission >> Speed Sensor - Output >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Speed Sensor - Output: Installation

  1. Verify o-ring is installed into position. See Figure.
  2. Install and tighten output speed sensor to 27 N.m (20 ft. lbs.) torque.
  3. Connect speed sensor connector. See Figure.
  4. Connect battery negative cable.
scientia non olet · About LEMON Manuals