LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Town & Country Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Front Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Control Module: Installation

NOTE: Front Control Module must be programmed to the correct radio EQ curve using the DRBIII(R). This will ensure that the audio system is operating correctly.
  1. Install the Front Control Module (FCM) in the Integrated Power Module (IPM) assembly by pushing the 49-way electrical connector straight in.
  2. Install the FCM retaining screws. Torque the screws to 1 N-m (7 in. lbs).
  3. Rotate the IPM assembly downward to secure in mounting bracket.
  4. Install the battery in the vehicle.
  5. Connect the positive and negative battery cables.
  6. Using the DRB III(R), under "FRONT CONTROL MODULE" then "MISC" program the EQ curve of the radio into the Front Control Module. Refer to the appropriate diagnostic procedures.
NOTE: If the vehicle is not equipped with Name Brand Speakers (Infinity, etc.) or Headlamp Washers the DRBIII(R) must be used to Disable the appropriate relays in the Integrated Power Module Assembly.
scientia non olet · About LEMON Manuals