Front Control Module: Removal
- Disconnect and isolate the negative and positive battery cables from the battery.
- Remove the battery from the vehicle.
- Using a long flat-bladed screwdriver, gently twist the Integrated Power Module (IPM) retaining clip outboard to free the IPM from its mounting bracket (Fig 1
). Rotate IPM upward to access the Front Control Module (FCM) retaining screws.
Courtesy of DAIMLERCHRYSLER CORP.
- Remove the front control module retaining screws.
- Using both hands, pull the FCM straight from the IPM assembly to disconnect the 49-way electrical connector (Fig 2
) and remove the front control module from the vehicle.
Courtesy of DAIMLERCHRYSLER CORP.