LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> 300M Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Engine Block Heater >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Block Heater: Installation

  1. Thoroughly clean cylinder block heater cavity.
  2. Insert heater assembly into block such that mounting hole is located below heater terminals.
  3. Install mounting screw and tighten to 12 N.m (105 in.lbs.).
  4. Attach power cord to heater.
    CAUTION: To prevent damage, the power cord must be secured in its retainer clips, and not positioned so it could contact linkages or exhaust manifolds.
  5. Lower vehicle.
scientia non olet · About LEMON Manuals