LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Electrical Diagnostics >> Diagnosis And Testing >> DTC P0131: O2 Sensor 1/1 Circuit Low >> Diagnostic Test >> 11. Intermittent Wiring And Connectors
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

11. Intermittent Wiring And Connectors

The condition that caused this DTC to set is currently not present. Inspect the related wiring harness for a possible intermittent condition.

NOTE: Check connectors - Clean/repair as necessary. Poor pin to terminal connections can set DTCs. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors specific to this DTC. Wiggle the wires while checking for shorts and open circuits.
NOTE: Check for any Technical Service Bulletins that may apply.

Were there any problems found? 

  1. Yes  >> Repair as necessary.

    See POWERTRAIN VERIFICATION TEST - VER 2  .

  2. No  >> The condition that caused this DTC to set is currently not present. Inspect the related wiring harness for a possible intermittent condition.