LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Intrepid SE >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Cluster Bezel >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cluster Bezel: Installation

  1. Connect headlamp switch connector. Place the cluster bezel into position and snap it into place firmly.
  2. Install the two screws over upper cluster bezel in instrument panel brow area and all remaining attaching screws.
  3. Install the items covering the bezel mounting screws.
  4. Install the one screw (Concorde/300M) to cluster bezel

    To service any instrument cluster component, the instrument cluster must be removed from the instrument panel. Use the following procedure:

  5. Tilt the steering column down into the highest position.
  6. Install the steering column shroud cover.
  7. Install the instrument panel left end cap.
  8. Connect the negative battery cable remote terminal to the remote battery post (Figure ).
scientia non olet · About LEMON Manuals