LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> Ignition Control >> Camshaft Position Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Camshaft Position Sensor: Removal

  1. Disconnect the negative battery cable.
  2. Remove air cleaner box.
  3. Unlock the camshaft sensor electrical connector (Fig 1).
  4. Disconnect the electrical connectors to the camshaft sensor.
  5. Remove the mounting bolts.
  6. Remove camshaft sensor (Fig 2).
    Fig 1: Locating Cam Sensor
    G03571464Courtesy of DAIMLERCHRYSLER CORP.
    Fig 2: Removing Cam Sensor
    G03571465Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals