LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Radiator >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Cooling System: Radiator: Installation

  1. Install A/C condenser, (if removed)(Refer to PLUMBING ).
  2. Install radiator fan assembly, if removed (Refer to RADIATOR FAN  ).
  3. Install auxiliary transmission cooler, if removed.
  4. Slide radiator down into position. Seat the radiator with the rubber isolators into the mounting holes provided, with a 10 lbs. force.
  5. Install mounting screws.
  6. Connect the cooling fan electrical connector.
  7. Install the radiator upper and lower hoses
  8. In the LH and RH radiator seals.
  9. Install the upper radiator seal.
  10. Install the auxiliary transmission coole hoses.
  11. Connect the coolant reserve/recovery hose.
  12. Install the front fascia (Refer to FRONT FASCIA ).
    Fig 1: Identifying A/C Condenser & Radiator
    G03571383Courtesy of DAIMLERCHRYSLER CORP.
  13. Fill the cooling system. (Refer to STANDARD PROCEDURE - COOLING SYSTEM FILLING )
  14. Connect negative cable to battery.
scientia non olet · About LEMON Manuals