Input Flange Seal: Installation

WARNING: This page is about a different variant/trim than selected.

Using tool 8802, install input flange seal to overrunning clutch case (Fig 1 ).

Fig 1: Installing Input Seal
Courtesy of DAIMLERCHRYSLER CORP.
Install input flange (Fig 2 ).

Fig 2: Installing Input Flange
Courtesy of DAIMLERCHRYSLER CORP.
Install flange washer and nut (Fig 3 ) (Fig 4 ).

Fig 3: Installing Input Flange Washer
Courtesy of DAIMLERCHRYSLER CORP.

Fig 4: Installing Input Flange Nut
Courtesy of DAIMLERCHRYSLER CORP.
Using tool 6958, torque flange nut to 135 N.m (100 ft. lbs.) (Fig 5 ).

Fig 5: Installing Input Flange Nut
Courtesy of DAIMLERCHRYSLER CORP.
Install propeller shaft. (Refer to PROPELLER SHAFT (AWD) )
Lower vehicle.