LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Sebring Base, 2D Coupe, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Electronic Control Modules - Except Coupe) >> Heated Seat Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Heated Seat Module: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Position the heated seat module under the seat.
  2. Connect the wire harness connector on the back of the heated seat module.
  3. Reposition the drivers power seat track.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals