LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module-Seat Memory >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module-Seat Memory: Installation

CAUTION: The Memory Seat Module (MSM) mounting tabs can be damaged during module installation. Use care to properly align tabs to prevent binding that could result in tab breakage.
Fig 1: REMOVING/INSTALLING MEMORY SEAT MODULE
GC0015860Courtesy of DAIMLERCHRYSLER CORP.
  1. Place the module (4) into position making sure the mounting tabs are properly aligned with the front bracket.
  2. Push down on the rear of the module (4) snapping the retaining clips into place in the side brackets.
  3. Connect the MSM rear harness connectors (1).
  4. Connect the MSM front harness connectors.
  5. Install the driver seat cushion/cover (2) (Refer to BODY/SEATS/SEAT CUSHION COVER - INSTALLATION) .
  6. Connect the battery negative cable.
  7. Verify system and vehicle operation.
scientia non olet · About LEMON Manuals