LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Electronic Control Modules) >> Heated Seat Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Heated Seat Module: Removal

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the driver seat to the full rearward and inclined position.
  2. Working under the driver front seat, remove the two heated seat module retaining screws. Due to the fact that the retaining screws are installed with the seat cushion pan removed, a small right angle screwdriver will be required to access and remove the screws.
  3. Disconnect the seat wire harness connector from the connector receptacle on the back of the heated seat module. Depress the connector retaining tab and pull straight apart.
  4. Remove the heated seat module from under the front seat.
scientia non olet · About LEMON Manuals