Memory Set Switch: Installation
WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Position the memory switch and install and tighten the two screws that secure the memory switch to the back of the driver side front door trim panel switch bezel. Tighten the screws to 2.2 N.m (20 in. lbs.).
- Reconnect the memory switch wire harness connector to the memory switch.
- Install the trim panel switch bezel onto the driver side front door.
- Reconnect the battery negative cable.