LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Power Sliding Door System) >> Latch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Section 267 (Power Sliding Door System): Latch: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the latch assembly in the vehicle. Be certain all latch mounted components are installed on the replacement latch assembly. If not, transfer components from the old latch to the new latch assembly.
  2. Connect the lock actuator link rod on the latch assembly.
  3. Connect the hold open latch cable on the latch assembly.
  4. Connect the inside and outside handle cables on the latch assembly. Refer to LATCH/LOCK ASSEMBLY for detailed instructions.
  5. Connect all electrical connectors leading to the latch assembly.
  6. With assistance from another person, position the side door and install the door latch retaining bolts. Torque to 10 - 12 N.m (100 in. lbs.).
  7. Install the weathershield if necessary. Refer to SLIDING DOOR WEATHERSTRIP for detailed instructions.
  8. Install the appropriate side door trim panel. Refer to TRIM PANEL for detailed instructions.
  9. Connect the negative battery cable.
scientia non olet · About LEMON Manuals