LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Electronic Control Modules (Service Information)) >> Module-Anti-Lock Brakes >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module-Anti-Lock Brakes: Installation

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If the ABM is being replaced with a new ABM is must be reprogrammed with the use of a DRB III.
  1. Install ABM to the HCU.
  2. Install the pump connector to the ABM.
  3. Install mounting bolts. Tighten to 2 N.m (16 in. lbs.).
  4. Install the wiring harness connector to the ABM and push down on the release to secure the connector.
  5. Install negative battery cable to the battery.
scientia non olet · About LEMON Manuals