LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 361 (Electronic Control Modules (Service Information)) >> Module-Seat Memory >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module-Seat Memory: Installation

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: REMOVE/INSTALL MEMORY SEAT MODULE
GC0009824Courtesy of DAIMLERCHRYSLER CORP.
  1. Place the module (4) into position making sure the front snaps into the seat frame (3).
  2. Connect the memory seat module harness connectors (1).
  3. Pivot the module (4) downward and snap it into place in the side brackets.
  4. Install the driver seat cushion/cover (2) (Refer to BODY/SEATS/SEAT CUSHION COVER - FRONT - INSTALLATION) .
  5. Connect the battery negative cable.
  6. Verify system and vehicle operation.
scientia non olet · About LEMON Manuals