LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 361 (Electronic Control Modules (Service Information)) >> Module-Seat Memory >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module-Seat Memory: Removal

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: REMOVE/INSTALL MEMORY SEAT MODULE
GC0009824Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the driver seat cushion/cover (2) (Refer to BODY/SEATS/SEAT CUSHION/COVER - FRONT - REMOVAL) .
  3. Unsnap the memory seat module (4) from the side brackets.
  4. Pivot the module upward and disconnect the electrical connectors (1).
  5. Pull the module rearward to remove it from the front of the seat frame (3).
scientia non olet · About LEMON Manuals