3.7L V-6
WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
The Manifold Absolute Pressure (MAP) sensor is mounted into the front of the intake manifold. An o-ring is used to seal the sensor to the intake manifold.
- Clean MAP sensor mounting hole at intake manifold.
- Check MAP sensor o-ring seal for cuts or tears.
- Position sensor into manifold.
- Install MAP sensor mounting bolts (screws). Refer to TORQUE - FUEL SYSTEM .
- Connect electrical connector.