Memory Set Switch: Installation
WARNING: This page is about a different car, the 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Position the memory switch and install and tighten the 2 screws that secure the memory switch to the back of the driver side front door trim panel switch bezel. Tighten the screws to 20 INCH lbs. (2.2 N.m).
- Reconnect the memory switch wire harness connector to the memory switch.
- Install the trim panel switch bezel onto the driver side front door.
- Reconnect the battery negative cable.