Section 99 (Power Steering System): Bushing: Installation
WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Coat all bushings with a thin rubber lubricate oil prior to installation.
NOTE:
A rubber mallet can be used to assist in the installation of the bushings once lubricated.
- Coat the rear bushings with a thin rubber lubricate oil then install the rear bushings using a rubber mallet to seat the bushings in the gear.
- Coat the front bushings with a thin rubber lubricate oil then install the front bushings using a rubber mallet to seat the bushings in the gear.
- Install the steering gear. (Refer to INSTALLATION ).
- Adjust the toe position (if necessary.) (Refer to SPECIFICATIONS & PROCEDURES ).