LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> DTCS B210E To U0141 >> Diagnosis And Testing >> B223D-Occupant Classification Module DTC Present >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

  1. 1)  ACTIVE OR STORED DTC 

    With the scan tool, read the OCCUPANT RESTRAINT CONTROLLER active DTCs.

    Is the B223D-OCCUPANT CLASSIFICATION MODULE DTC active? 

    Yes 

    1. Go To step  2).

    No 

    1. With the scan tool, perform the ORC VERIFICATION TEST VER-1.
  2. 2)  ACTIVE DTC IN OCCUPANT CLASSIFICATION MODULE 

    With the scan tool, read the OCCUPANT CLASSIFICATION MODULE active DTCs.

    Are there any active DTC present? 

    Yes 

    1. Refer to DIAGNOSTIC CODE INDEX .

    No 

    1. Go To step  3).
  3. 3)  REPLACE THE OCCUPANT RESTRAINT CONTROLLER 
    WARNING: To avoid personal injury or death, turn the ignition off, disconnect the battery and wait two minutes before proceeding.
    WARNING: If the airbag control module is dropped at any time, it must be replaced. Failure to take the proper precautions can result in accidental airbag deployment and personal injury or death.

    If there are no possible causes remaining, view repair. 

    Repair 

    1. Replace the OCCUPANT RESTRAINT CONTROLLER .
    2. Perform *ORC VERIFICATION TEST - VER 1 .
scientia non olet · About LEMON Manuals