Security System Module: Installation
Courtesy of DAIMLERCHRYSLER CORP.
- Install the central locking pump/security system module (3) into the trunk and connect the air lines (2) and the electrical harness (1).
- Install the central locking pump/security system module into sound deadening foam covering and slide it back into place.
Courtesy of DAIMLERCHRYSLER CORP.
- Install the right half of the trunk floor covering (3).
- Install the rear interior trim panel (2).
- Install the right side interior trim panel (4).
- Install the right upper trim panel (1).
- Install the trunk floor carpet.
- Connect the negative battery cable.