LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System (Service Information) >> Ignition Coil >> Removal - SRT
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal - SRT

Fig 1: Disconnecting/Connecting Negative Battery Cable
GC0035079Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable (2).
    Fig 2: Removing/Installing Engine Cover
    GC0032344Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove the engine cover (1). Grasp both corners of the engine cover, and pull up firmly.
    Fig 3: Removing/Installing Upper Air Cleaner Housing
    GC0032345Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the upper air cleaner housing by removing the inlet tube (2) and the retaining screws (1). (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL) .
    Fig 4: Removing/Installing Spark Cables
    GC0035093Courtesy of DAIMLERCHRYSLER CORP.
  4. Disconnect the ignition coil harness connector (2).
  5. Disconnect both the spark plug cables from the spark plugs (3).
  6. Remove the ignition coil mounting bolt (1).
  7. Remove the ignition coil from the engine.
scientia non olet · About LEMON Manuals