LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Electronic Control Modules - Except Coupe) >> Heated Seat Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Heated Seat Module: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the appropriate power seat track to its uppermost and rearward-most stop position.
  2. Disconnect and isolate the negative battery cable.
  3. Reach under the front of the seat cushion and separate the heated seat module from the seat cushion frame. See Figure.
  4. Disconnect the wire harness connector from the connector receptacle on the back of the heated seat module.
  5. Remove the heated seat module from the vehicle.
scientia non olet · About LEMON Manuals