LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 319 (Electronic Control Modules) >> Engine Control Module >> Standard Procedure >> Standard Procedure - Pcm/ECM/Skim Programming - Diesel >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Standard Procedure - Pcm/ECM/Skim Programming - Diesel: Notes

WARNING: This page is about a different car, the 2006 Dodge Grand Caravan, 2006 Dodge Caravan, and 2006 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before replacing the PCM/ECM for a failed driver, control circuit or ground circuit, be sure to check the related component/circuit integrity for failures not detected due to a double fault in the circuit. Most PCM/ECM driver/control circuit failures are caused by internal component failures (i.e. relay and solenoids) and shorted circuits (i.e. pull-ups, drivers and switched circuits). These failures are difficult to detect when a double fault has occurred and only one DTC has set.
scientia non olet · About LEMON Manuals