LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Sentry Key Immobilizer Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sentry Key Immobilizer Module: Removal

  1. Disconnect and isolate the battery negative remote cable.
  2. Remove Lower Instrument Panel Cover. Refer to INTERIOR/EXTERIOR .
  3. Remove the steering column upper and lower shrouds. Refer to SHROUD - UPPER/LOWER .
  4. Disengage the steering column wire harness from the Sentry Key Immobilizer Module (SKIM). See Fig 1.
    Fig 1: Sentry Key Immobilizer Module (Skim) Remove/Install
    GC0019907Courtesy of DAIMLERCHRYSLER CORP.
    1 - IGNITION KEY CYLINDER
    2 - STEERING COLUMN
    3 - SENTRY KEY IMMOBILIZER MODULE (SKIM)
    4 - SKIM CONNECTOR
    5 - SKIM ANTENNA
  5. Remove the two screws securing the SKIM to the top of the steering column. See Fig 1.
  6. Rotate the SKIM and its mounting bracket upwards and then to the side away from the steering column to slide the SKIM antenna ring from around the ignition switch lock cylinder housing. See Fig 1.
  7. Remove the SKIM from the vehicle.
scientia non olet · About LEMON Manuals