Controller Antilock Brake: Removal

WARNING: This page is about a different car, the 2005 Dodge SX, 2005 Dodge SRT-4, and 2005 Dodge Neon. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect battery negative cable.
Raise vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)
Disconnect pump/motor connector from CAB. See Fig 1.

Fig 1: CAB Mounting
Courtesy of DAIMLERCHRYSLER CORP.

1 - PUMP/MOTOR CONNECTOR

2 - CAB MOUNTING SCREWS
Remove four screws securing CAB to HCU half of ICU. See Fig 1. Remove CAB from HCU.
Pull outward on CAB connector lock and disconnect 24-way wiring connector. Remove CAB from vehicle.