Removal - 2.0/2.4/2.4 Turbo/2.4L SRT-4

WARNING: This page is about a different car, the 2005 Dodge SX, 2005 Dodge SRT-4, and 2005 Dodge Neon. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove and relocate the air cleaner box, refer to AIR CLEANER HOUSING (2.0) or AIR CLEANER HOUSING (2.4) for more information. See Fig 1.

Fig 1: AIR BOX RELOCATED
Courtesy of DAIMLERCHRYSLER CORP.
Unlock and disconnect the electrical connectors at the PCM. See Fig 2.

Fig 2: CONNECTORS INSTALLED
Courtesy of DAIMLERCHRYSLER CORP.

1 - Wiring Clip

2 - PCM
Remove the wiring harness clip from the PCM bracket. See Fig 3.

Fig 3: WIRING HARNESS
Courtesy of DAIMLERCHRYSLER CORP.
Remove the mounting bolts from the bottom of the PCM bracket. See Fig 4.

Fig 4: PCM AND BRACKET
Courtesy of DAIMLERCHRYSLER CORP.
Remove the nut and bracket screws.
NOTE: For PL 2.4L SRT-4 remove PCM from bracket then remove both parts
Remove the assembly, PCM and bracket.